27 C
Delhi
Tuesday, May 24, 2022

How to FIXING Driver Power State Failure on Windows 10 ?

Theinfowave- If you have seen the driver power state failure error on your Windows 10 computer , don’t worry. You may experience this problem because of different reasons. In most cases, it’s due to issues related to power setting or driver. The good news is that fixing this problem is relatively easy. 
We’ve covered a few solutions on this post that should help you fix the problem. You don’t necessarily have to try every single one of them. Just work your way down the list until you find a solution that works for your PC.

How Do You Solve Driver Power State Failure?

Follow these simple steps:

  1. Press the Windows key + R to open Run box 
  2. Type msconfig and hit Enter 
  3. Click on the Boot tab and check the box besides Safe Boot 
  4. Click OK and reboot your PC.

NOTE: To boot your computer in normal mode again, you will have to uncheck SafeBoot by following the same process.

How Do I Get Rid Of the Blue Screen on Windows 10?

Here are the steps you need to follow:

  1. Right-click on This PC
  2. Then go to Properties 
  3. Click on Advanced System Settings on the left side of the window 
  4. Under Startup and Recovery, click on Settings
  5. Then under System Failure, uncheck the box beside Automatically restart 
  6. Click OK to save.

Remove Your Peripherals

Your computer may not function properly and even cause the blue screen issues due to peripherals connected to the computer. So, you may want to disconnect all peripherals to see if the problem will be resolved. 

Here are the steps you need to follow:
  1. Press and hold down the power button until your computer shuts down 
  2. Disconnect all peripherals, i.e. scanner, printer, USB drive, mouse, etc. 
  3. Try to power on your computer again 
If your computer runs without any issues, it means one of the peripherals you have removed is the culprit. Reinstall the devices one by one to test each one of them. This will allow you to identify the specific device that is causing the problem. 
Once you identify the problematic device, you can go ahead and replace it. Or, contact the device’s manufacturer for help.
Try the solution next solution. 

Run the Windows Troubleshooter 

The troubleshooter is a built-in tool that can automatically identify and fix common issues on Windows 10. Here are the steps you need to follow to run the Windows troubleshooter:

  •  Press the Windows key on your keyboard and type troubleshoot and hit Enter
  • Click on Blue Screen, and then on Run the troubleshooter


  • Wait for the troubleshooter to find and fix the problem, and reboot your computer.
  • Check if the issue persists. If it does, try the next solution below. 

Disable Power Saving

   Here are the steps you need to follow:
  • ress the Windows key + R on your keyboard to open the Run box .
  • Type control panel into the box and click OK to navigate to the next window.
  • Select Small Icons under View by and select Power Options .
  • Select the radio button beside Balanced (recommended) and click on Change plan settings .
  • Click on Change advanced power settings .
  • Now expand Wireless Adapter Settings and Power Saving Mode, and then select Maximum Performance from the run-down menu.



  • Expand PCI Express and Link State Power Management, and then select Maximum power savings from the run-down menu

  • Click on Apply and then OK.
 Restart your PC and check to see if the problem has been resolved.

Related Articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Stay Connected

25,000FansLike
1,500FollowersFollow
5,000FollowersFollow
6,000SubscribersSubscribe

Latest Articles